Fly Bed Trampoline
Standard Inground Package Kit
7′ x 14′ Bounce Surface | 11’8″ x 18’8″ Total Footprint
1 Two-String Fly Bed – 116 Regular Side Springs – 12 Regular Corner Springs – 1 In-Ground Steel Frame – 8 Deluxe Safety Pads
The tramp that redefined trampoline sports. Featuring self-centering technology on a featherweight Two-String Fly Bed, enough Regular Side & Regular Corner Springs (with a few handfuls of extras to keep you going for years!) and our heavy duty Steel Frame cushioned by our industry-changing Standard Safety Padding. This complete package kit comes ready to be assembled and installed in a 12′ x 19′ (568.96 x 355.6cm) area with a 98 foot surface area to bounce on. Perfect for junktramp, gtramp, and trampwall rooms and play areas for athletes of all skill levels!
Our fly beds are made of 100% multifilament polyester with a higher break strength than machine-made poly bed or similar 4mm competition web bed trampolines. This makes for a stronger, higher quality bed with higher action than those used at the Olympics. Our string is solution dyed for more color fastness, won’t bleed and is treated with a non-yellowing, moisture resistant and weatherproofing process to offer great UV protection so it won’t fade or weaken by the sun.
Web and poly beds limit and deter air flowing through a trampoline’s bedding. We designed our fly bed to provide maximum height to cater to all athletes performing complex off-axis spins and flips. Our special two-string 1/4-inch weave allows high levels of air to flow through the bed, giving it speed and the snap necessary to make you soar. Handmade on our specialty looms in the USA.
Our springs are high-strength steel and made in the USA. Our corner spring system of 12 Regular Corner Springs, each measuring 11.65″ (29.5cm), stabilize the athlete when they bounce too close to the corner or side of the apparatus. This helps center the bouncer and stops the bouncer from launching into an unwanted direction. Designed for use with our Regular Side Springs which measure 10.75″ (27.3cm).
Our springs have the most active coils per inch. A helical cone end design tipped with long, round center-placed hooks produce the sturdiest bed-to-frame attachment. The close wind of each adjacent coil provides the highest deflection with the greatest elastic limit. This creates a maximum stress limit for the heaviest of trampolinists and their repeat, continual tricking for years. A resilient coating enables each spring to endure the most brutal of environments. Together, our springs will bounce you upwards of 20 feet and more depending on your skill level! Always know your skill set and limitations and bounce responsibly.
Each high-strength steel trampoline frame is made in the USA. Our wiggle wire design reduces spring friction and lessens spring wear. Our frames are treated with a thick powder coating to hold up to the worst weather, guard against rust and added protection to heavy use. Our super tramp frame consists of 12 sections–6 sections measuring 66″ (167.6cm) and 6 sections measuring 36″ (91.4cm)–for ease of handling and installation. Each design element of our frames contribute to their longevity, ease of installation, and help the physics behind our springs and fly beds as straight-up as possible. Currently, our 7 x 14 Steel Frames are Forest Green for the 2022-2023 season.
Our Standard Pads are 2″ (5cm) thick and 28″ (71cm) wide and made of medium density polyurethane foam. All pads are wrapped in durable 18oz PVC-coated vinyl that won’t rip or tear. Made in the USA.
Any order with a custom design will require design service unless you provide the required assets according to our standards. Each custom project includes one (1) hour of design work and/or up to two (2) revisions; further custom design service is billed at $150.00USD per hour. Custom design hours will be billed after 30 days if no approval is received and your order will be closed. Any changes in custom design past the approval date will be billed as a separate item.